DIYs to Bring the Seaside Home

I’ve just returned from a wonderful stay by the seaside in Devon, a favourite of the TFD household when we’re in need of some R&R. We go at least once a year and make sure to stay right on the seafront where we sit with endless cups of tea and lots of books (I finished 3 last week, a new personal record!).

A blue seaside scene with two sail boats on the horizon

I love being by the sea and every time I’m there I can’t help but become more inspired than ever. The last week was no exception and, although I’m pining to be back on the beach with the sand between my toes, I’m also feeling refreshed and my mind is now bursting with ideas! I’m lucky enough to really enjoy my job, but there’s something about clearing your mind of the everyday and getting away from the 9 to 5 that just helps to recharge those creative batteries!

I live nowhere near the sea, so I love to include beach inspired elements in my home decor to remind me to stay inspired. In this post I’m going to show you a couple of my favourite, super easy (and I seriously mean super easy!) seaside inspired crafts, perfect for city homes and coastal dwellings alike.

 

Driftwood star

A small DIY star made from lots of small driftwood sticks.

A group of images showing how to DIY your own seaside driftwood star.

Cut a circle from some sturdy cardboard and use a glue gun to fix drift wood in place all the way around. Yes, it’s as easy as that!

 

A trio of images depicting a seaside themed pendant made of pebbles, seaside themed beads and buttons. Another picture shows some clear fishing line used in the DIY.

Thread clear fishing line through pebbles and shells with holes in to create a nautical pendant that you can hang anywhere in your home. I’ve also added some freshwater pearls, buttons and other nautical treasures to give a pop of colour!

A seaside scene showing waves ebbing against the shore with a blue sky in the background.

Let me know if you gave these DIYs a go, I’d really like to see how they turned out. I would love to hear from you if you have any tips for my next visit to Devon too!

 

Living Room Makeover: Geometric Feature Wall

A room with a geometric feature wall painted with geometric triangular shapes in navy, grey and sage green, with a giant anglepoise floor lamp and some metal shelves.

Our house is a new build and, as with many new builds, we were advised not to paint the walls for the first 18 months. This is a rule that we stuck to, but I’ve been longing to give our living room a statement wall for months, so I was hitting up the local DIY shops as soon as we reached the point that we were allowed to paint!

I’m never one to shy away from a bold decor statement, and having had the last year and a half to plan I decided that instead of picking one paint colour, I wanted to pick three. Finally, last weekend, armed with some Frog Tape and a paint roller, I set to work on my long awaited geometric masterpiece, and I’m so pleased with how it turned out that I’m going to share with you how I did it!

A room with a geometric feature wall painted with geometric triangular shapes in navy, grey and sage green, with a black sofa and a vintage navy trunk, a large floor lamp and some metal shelves.

Take some time to plan the shapes you would like, where you want your lines to sit and what colour you want each shape to be. I sketched out lots of different designs and picked a favourite before I set to work marking it out on the wall using masking tape.

Ideally you will use a laser level to get the masking tape lines perfectly straight on the wall, but if, like me, you don’t have access to one of these magical tools, I can reassure you that it is still possible to get the lines straight by eye. Just take a step back each time you apply some tape and re-adjust as necessary. Your lines won’t be perfect, but honestly, no-one will notice!

Top tip: Make sure you use a good quality masking tape for this project. My go-to is Frog Tape. You want your lines to be as clean as possible and by using cheaper masking tape you can run the risk of your paint lines bleeding into each other. Not a good look!

A plain white wall with masking tape laid out to make geometric shapes.
I chose to bring the shapes in my feature wall out slightly onto the adjacent walls. I feel that this adds to the impact whilst also tying the room together a little more.

You will also want to mask off the areas that you don’t want to paint, like skirting boards, the ceiling, plug sockets, and so on. My wall also had a radiator on, which I chose to take down so that I could paint behind it.

2 plug sockets with masking tape around the edges.

Once you’ve masked off all of the necessary areas and made sure that your floor and furniture are all sufficiently covered by a protective sheet, it’s time to get painting!

A geometric feature wall in the midst of being decorated. The floor is covered with a plastic sheet and the walls are partially painted.

Once you have filled in all of your geometric shapes with paint and they are completely dry, you can gently pull off the masking tape. You’re not finished yet though! Obviously, the parts of the wall that were hidden under the masking tape will be unpainted, leaving gaps between each shape. You may want to keep these lines, but for me, it wasn’t the look I was aiming for so I  masked up the areas next to these unpainted lines and filled in the gaps.

A geometric feature wall painted with triangular shapes in navy, grey and sage green. There are white lines between each painted triangle and dotted lines have been drawn to show where the masking tape should go.

A feature wall painted with geometric triangular shapes in navy, grey and sage green. There are white lines between each triangle and coloured lines have been drawn to show which areas need to be painted over.

Once again, you will need to wait for the paint to dry. Then, once you’ve removed the masking tape (again!) you’re done. You have the geometric feature wall of your dreams!

A blank white wall with 6 framed pictures on it and with a black sofa, a large lamp and a set of metal shelves in front.
Before
A room with a geometric feature wall painted with triangular shapes in navy, grey and sage green, with a black sofa and a vintage navy trunk, a large floor lamp and some metal shelves.
After

I’m so excited to have tackled my first big painting project in the house. It was a bold move, but I really feel that it’s made the living room a much more cohesive space.

Let me know if you decide to give this a go. I would love to hear how it turns out!

Giant Pegboard DIY

Following the latest season of Revamp Restyle Reveal, I’ve been feeling inspired to tackle the rooms of our house that just haven’t had much love, and our blank walled bathroom was at the top of he list! Over the last year I’ve gathered plenty of knick knacks that I thought would look great in our bathroom and I’ve been longing for a way to display my finds so that I can enjoy them while I have a soak. Never wishing to waste an opportunity to exercise some creativity and to hone my DIY skills, I decided that I wanted to more than just put up some shelves, and after a fair bit of Pinterest browsing I decided that a giant pegboard was the answer to my woes!  I loved the idea of being able to switch things up on whim and how this practical storage solution doubles as a quirky, industrial style, decor statement. If you like the sound of this too, you should definitely read on to find out how to make your own!

2 giant plywood pegboards mounted on a wall, styled with some littloe shelves and hanging plants.

Materials for this project:

  • Plywood of the size and thickness of your choice (my boards were 12mm thick)
  • Dowel (to make the pegs)

Tools for this project:

  • A drill
  • A Forstner drill bit (the same diameter as your dowel)
  • A spirit level (for mounting your board to the wall)
  • Goggles (because nobody wants to get flying bits of plywood in their eyes)

Overall, this was an extremely affordable project. One huge sheet of 12mm thick softwood ply cost me £28 and the hardware shop that I bought it from cut it to size for free. I insisted on taking all of the offcuts home for future DIY projects (so watch this space!). I wanted my boards to be slightly raised off the wall, so I also bought 4 pine batons to use for mounting the boards, along with a metre of dowel to make the pegs. All in, the materials for this project cost me less than £40!

Now, depending on the space that the pegboard is going in, the sizes and measurements will be different for everyone. In case you’re interested though, my pegboards were 100cm x 55cm and the peg holes were all 14mm. With a lot of careful measuring I worked out that I needed a gap of 7.5 cm at the top and the bottom of the board and a gap of 2.5cm on each side in order to space the peg holes 10cm apart. I took my time working out these measurements and marked out exactly where each hole needed to go before going anywhere near a drill. Remember, measure twice (or about twenty times if you’re me!) and drill once. Trust me, patience will save you A LOT of hassle in the long run!

After carefully measuring up, I put my plywood on a raised workbench, making sure that there was nothing underneath that I would accidentally make a hole in. I then donned my goggles and started drilling small 3mm pilot holes right the way through the board into every point that I had marked for the peg holes. This is an important step for reasons that will become apparent later on! Whilst doing this I made sure to keep my drill as upright as possible to ensure that the drill holes were not wonky, otherwise the peg holes would be wonky, and then the pegs would be wonky… and nobody wants wonky pegs.

Next, I swapped my 3mm drill bit for a 14mm Forstner drill bit and, using each pilot hole as a guide, I drilled approximately half way through the thickness of the plywood (again, keeping the drill as upright as possible). Now, why not drill all the way through, you might ask? Well, during my practice runs I quickly realised that if I drilled all the way through in one go, the drill bit would splinter the plywood on the way out. Not pretty!

The pegboard in progress. A picture of a drill and some plywood with one partially drilled hole.

Top tip: If you’re inexperienced with drills (like me!) use some scrap plywood to practice on. This way you can perfect your technique before making a start on the real thing!

Another top tip: You can actually buy guiding tools that will ensure that your drill holes are as straight as possible. I didn’t know they existed until after I’d completed this project (damn!). My pegboard still turned out great, but if you want yours to be the height of perfection then you might want to consider one of these!

After drilling about half way through on the one side, I then flipped the plywood over to drill the rest of the way through on the other side of each hole, creating a nice clean cut on both sides. Now, this is where the pilot holes really come into their own, because you can see exactly where you drilled through on the other side of your pegboard and you know that you’re going to meet in the middle!

A picture of the pegboard in progress. A drill on top of a sheet of plywood with lots of partially drilled holes. It's starting to look like a pegboard, but it's not quite there yet.

Yay! Now you’ve drilled all of your holes, you have a pegboard! On to the fun of mounting the board on the wall…

Every home is different, so you will have to tailor this step to suit the type of walls that you have. I have plasterboard walls, so for each board I opted to cut 2 pine batons to the same width and, after a lot more careful measuring, I used plasterboard fixings to secure these to the wall exactly where I wanted the top and bottom of each pegboard to go. I then attached the pegboards to the pine batons with screws, using a spirit level to keep the boards straight….Well, I say ‘I’ did this, actually it was ‘we’. Mounting these boards to the wall was definitely a 2 person job and I would recommend getting help from a trusted companion for this task!

Before the pegboards went up. Just an empty wall with one lone framed picture.
Before…
2 pegboards mounted on the wall
After!

When your pegboard is finally mounted on the wall, you can style it and rearrange it to your hearts content! I used some of the offcuts of my plywood to make little shelves and I also found it a great place to hang some plants!

This is by far one of the biggest DIY projects I’ve tried, and it’s also one of my favourites. I hope that it’s inspired you to have a go yourself! I would love to know what you think, so feel free to get in touch!

Floating Frame DIY

I love crafting and I’m always looking for creative ways to display the things that I’ve made and pieces of artwork that I’ve found. I’ve recently discovered an incredibly easy way to create beautifully minimalist floating frames out of things that you will probably have already lying round your home, and I wanted to share it with you!

All you will need:

2 bulldog clips and 2 matching picture frames

 

You will only need the glass from the picture frames, so they don’t need to be particularly fancy. I chose to use some basic clip frames, which you can find in a variety of sizes in most homeware shops.

Once you’ve removed the glass from each frame you can slot your chosen artwork in between the two panes and use a bulldog clamp on each side to hold them together (whilst, of course, being careful of any sharp edges and taking care not to break the glass!).

That’s it. That’s all you need to do. I told you it was easy!

 

2 floating frames, one with colourful confetti in and one with pressed flowers

 

The frames that I have made are 13cm x 18cm and I only need to use a couple of small bulldog clips. For bigger frames you can use bigger clips, and you may need to use more than 2.

 

One floating frame with a polaroid picture in

I love how versatile these frames are. They suit a wide range of decor styles because of how minimalist they look. It’s also so quick and easy to swap out what’s inside and they’re a great way to display all kinds of keepsakes. I’ve filled my frames with polaroids, small paintings, pressed flowers and colourful confetti, but the possibilities are endless!

 

One floating frame with a small watercolour painting of two roses and some leaves

 

A floating frame with some pressed flowers in

 

I would love to see what you use your floating frames for. Get in touch and let me know what you come up with!

 

 

 

No Churn Unicorn Ice Cream

 

I can’t believe it, today we finally have some sun! This seems like the perfect opportunity to show you how to make unicorn ice cream. Or, in other words, to give you an excuse to let your inner child run riot and then eat a frozen, sugary treat!

I used this recipe from BBC Good Food as the basis of my ice cream and added my own creative touches to create the final, magical product!

So, what will you need?

Ingredients

  • ½ a 397g tin of sweetened condensed milk
  • 600 ml double cream
  • Whichever flavourings you desire. I picked coconut and vanilla and used a teaspoon of each.
  • Food colouring in your colours of choice. I used very small amounts of red, blue and green to create pastel colours.
  • Decorations of your choice. I picked Hundreds and Thousands and edible sparkles

 

Tools

  • A hand mixer
  • A spatula
  • A large mixing bowl
  • Several smaller bowls, one for each colour you want to mix up
  • Cocktail sticks
  • One spoon per bowl, to mix up each colour of ice cream
  • A freezer safe container large enough to hold the ice cream and deep enough to be able to scoop from. I used a baking tin lined with cling film.

 

Step 1: Add the double cream to your large mixing bowl.

 

Step 2: Add the condensed milk to the cream.

 

Step 3 (optional): If you’re only using one flavouring, add it now! If you’re using more than one, wait until step 6.

Step 4: Use the hand mixer to whisk the mixture until it forms stiff peaks.

 

Step 5: Separate the mixture into several smaller bowls. One for each colour you are using.

 

Step 6: If you’re using more than one flavouring, add each one to a separate bowl now. That way, each colour of ice cream will have its own flavour!

Step 7: Dip a cocktail stick into the food colouring and mix it into the ice cream. By using very little food colouring you will give your ice cream very pale pastel colours. Use a little more food colouring if you want yours to be a bit brighter.

Do this individually for each separate bowl of ice cream.

Step 8: Use a spoon to mix the colour into the ice cream more thoroughly.

 

Step 9: Use a spatula to scoop all of your different colours of ice cream into your freezer safe container and swirl them all together.

Make sure not too mix the ice cream too much, otherwise you will lose the marble effect.

 

Step 10: Pop it in the freezer until it’s solid!

Step 11: Enjoy!

This ice cream is so creamy and decadent, I know it’s going to be a show stopping must for all of my summer gatherings! I hope you enjoy making this ice cream as much as I do, and I hope you enjoy eating it even more. Drop me a comment to let me know how yours turned out!